Making Our Large Wire Trees There are so many very good tutorials on YouTube that might be helpful. One I found showed how to make your gum trees foliage a lot thinner and his did look like gum trees. I tried to follow him but ended up with  much thicker trees so I have named ours Oak trees which we love anyway. Thank God the people that live in Glennanburg love whatever improvements we make and add to their little valley. You will need the following items to make your wire trees: -       Wire, I just used a gauge that I found I could bend and twist easily because there is a lot of bending and twisting. -       Pliers, you may find you may need this to help twist your wire, but on the internet some men have made some tools to help make this easier. I chose to just use the pliers and my figure....

                Wiring In The Town Wall Lights                          Before I could finish the plastering in front of the town wall, it was time to put my Hubby to work and do some wiring and drilling.  He does the wiring, fixing up the tracks, and all the electronics side, the decorative side is my gifts.                                       So for this we had to thread the wire very patiently down behind the fly wire mess. We did try feeding the wire through with a wire feeder, but it just couldn’t be pulled through. We had a very small limited area that we could drill a hole in, and to get thick enough gauged wire and the wires of the lights through at the same time just wouldn’t fit. We also needed the wire to go over on an angle towards t...